|
|
|
The BT BrickWall BW2S-XP is a simple and elegant brick wall compressor/limiter. Just insert the BT BrickWall BW2S-EX on your mono or stereo track, and you have a smooth audio track without the unwanted transients. By using this compressor/limiter on your master tracks, the harsh peaks in your program material will be eliminated allowing you to increase the overall level of your mix..
|
|
|
|
|
|
|
The BT Compressor CP2S emulates analog tube compressors in terms of looks, functions and sound including RMS and Peak compressions. A compressor words, but the warm analog sound of the BT Compressor CP2S is something you need to hear for yourself.
- Threshold and Ratio compression controls.
- Variable Attack and Release times.
- RMS and PEAK switch control.
- Ouput level (Makeup Gain) control.
- Easy-to-use vintage interface with gain reduction VU Meter.
- Windows XP / Vista32 and Mac OS X (Intel & PPC) supported
- VST, AU and RTAS supported
- 24 bit / 192 kHz supported
- Download Mac Version - AU-VST-RTAS-AS
- Download PC Version - VST-RTAS-AS
|
|
|
|
|
|
|
The BT Deesser DS-2S is a stereo deesser with vintage controls and sound. This deesser is designed to tame the harshness of certain vocal sounds, specifically “ess” sounds (hence, the name). However, this device can be useful in controlling the level of other “sibilant” vocal sounds as well, such as “t”, “sh” or “f” to name a few. A deesser works like a frequency specific compressor. In fact, the DS2S is essentially a compressor driven by a hi-pass/band-pass filters. It reduces the offending high frequencies when the level of those frequencies exceeds the threshold. Threshold and Frequency sliders are provided, as well as a Listen selector switch to hear only the frequencies being deessed. The DS-2S is the ideal way to take that unwanted “sizzle” out of your vocal tracks.
- Threshold and Variable Range.
- Internal Side Chain High and Low Pass Filters with Listen key.
- HPF and BPF modes.
- Easy-to-use vintage interface with gain reduction VU Meter.
- Windows XP / Vista32 and Mac OS X (Intel & PPC) supported
- VST, AU and RTAS supported
- 24 bit / 192 kHz supported
- Download Mac Version - AU-VST-RTAS-AS
- Download PC Version - VST-RTAS-AS
|
|
|
|
|
|
The BT Compressor FA770 provides the operation and sound of highly coveted analog
compressors. The FA770 is designed with a fixed-ratio and “time constant” switch (see settings below) as part of its characteristic vintage sound. This model proves that you do not need many knobs and sliders to achieve the great compression sound of the FA770. Adjust the Threshold, maybe the Time Constant to adjust the speed, and there you have it.
- Input gain control.
- Threshold control .
- Presets of Attack/Release times (Time Constant) .
- Ouput level (Makeup Gain) control.
- Easy-to-use vintage interface with gain reduction VU Meter.
- Windows XP / Vista32 and Mac OS X (Intel & PPC) supported
- VST, AU and RTAS supported
- 24 bit / 192 kHz supported
- Download Mac Version - AU-VST-RTAS-AS
- Download PC Version - VST-RTAS-AS
|
|
|
|
|
|
The BT ExpanderGate GX622 tames the noise floor so that you hear only the audio you want to keep. This fully-adjustable gate/expander reduces (or cuts) the signal if the level becomes too low (as determined by the Gate Threshold setting). This controls unwanted background noise on the track(s). Like a compressor, the Attack and Release controls determine how fast the gate opens and closes. To help the gate decide when to open, you can use the two Filter controls (Side Chain).
- Variable Attack, Hold and Release times.
- Threshold and Range controls.
- Internal Side Chain High and Low Pass Filters with Listen key button.
- Easy-to-use vintage interface with gain reduction VU Meter.
- Windows XP / Vista32 and Mac OS X (Intel & PPC) supported
- VST, AU and RTAS supported
- 24 bit / 192 kHz supported
- Download Mac Version - AU-VST-RTAS-AS
- Download PC Version - VST-RTAS-AS
|
|
|
|
|
|
The BT Limiter LM2S is an easy-to-use tube emulation limiter. The straightforward controls and out-standing sound make this limiter the perfect tool for mastering. In addition to the basic limiting controls (Peak Reduction, Attack, Release, and Output Gain), the LM2S also includes a 5-band EQ. This allows you to address those final sonic details in a mastering session while increasing the apparent loudness of your mixes.
- Variable Attack and Release times.
- Threshold compression control.
- Output level controls.
- 5 Band graphic equalizer with Pre/Post compressor.
- Easy-to-use vintage interface with gain reduction VU Meter.
- Windows XP / Vista32 and Mac OS X (Intel & PPC) supported
- VST, AU and RTAS supported
- 24 bit / 192 kHz supported
- Download Mac Version - AU-VST-RTAS-AS
- Download PC Version - VST-RTAS-AS
|
|
|
|
|
|
|
The BT Dual-Analog Chorus CH2S creates various types of classic modulation effects, such as Leslie, Chorus, and Auto-pan. In addition, this effect provides the ultimate in control over LFO's and panning, including waveform selection. Whether you need subtle enhancement or aggressive effects on a track, the CH2S has the power you need.
- 2 LFOs with Rate and Depth and Sync
- 2 Delay and Pan controls
- Wave - Sine/Triangle/Square/Saw Down/Saw Up
- Low EQ - low-shelf
- High EQ - high-shelf
- 2 HP and LP filters
- Input and output level controls
- Peak-Limiter control
- Easy-to-use vintage interface.
- Windows XP / Vista32 and Mac OS X (Intel & PPC) supported
- VST, AU and RTAS supported
- 24 bit / 192 kHz supported
- Download Mac Version - AU-VST-RTAS-AS
- Download PC Version - VST-RTAS-AS
|
|
|
|
|
|
|
|
The BT Analog Phaser APH2S is designed with all of the characteristics of a vintage analog phaser. The selectable 4-, 6-, 8- or 12-stage resonant analog filters enable this phaser to create various modulation effects. Various controls on the APH2S, such as Speed, Depth, Resonance, and Stage, all contribute to a wide range of phasing effects. Additionally, the Width control provides an adjustable stereo field and a Color control.
- LFO with Rate and Depth and Sync
- Wave - Sine/Triangle/Square/Saw Down/Saw Up
- 4-8-16-24 stage
- Resonance (Feedback)
- Width control
- Color control
- Mix and Output controls
- Peak-Limiter control
- Easy-to-use vintage interface.
- Windows XP / Vista32 and Mac OS X (Intel & PPC) supported
- VST, AU and RTAS supported
- 24 bit / 192 kHz supported
- Download Mac Version - AU-VST-RTAS-AS
- Download PC Version - VST-RTAS-AS
|
|
|
|
|
|
|
|
The BT Vintage Oilcan Echo TLE2S delivers the classic analog sound of a tape less oilcan echo/delay. This model adds “Color” to your music by providing various echo/delay styles from specific time periods, namely 1964, 1977, 1989, and 1995. These styles, along with the other various controls on the TLE2S, give you a wide range of time-based effects to add to your recordings.
- Input and output level controls
- Slap/Delay/Echo mode
- Color selector (1964/1977/1989/1995)
- Sustain control (feedback)
- Flutter control (vibrato)
- Mix control
- Easy-to-use vintage interface.
- Windows XP / Vista32 and Mac OS X (Intel & PPC) supported
- VST, AU and RTAS supported
- 24 bit / 192 kHz supported
- Download Mac Version - AU-VST-RTAS-AS
- Download PC Version - VST-RTAS-AS
|
|
|
|
|
|
|
The BT Tempo Delays DL3D is a tempo-driven delay effect with a classic analog sound. No more trial-and-error in setting tempo-based delay times. Simply sync the tempo of the song, and select the note value corresponding to the desired delay time. This delay provides three separate channels. Using the Pan controls, you can pan all three delay channels to the center, or spread the channels out across the stereo field (left, center, right). Gain controls set the levels for each channel individually.
- bpm Tempo sync
- All the 3 delays use individual Level and Pan controls
- Delay time selectable by notes
- Global Feedback control
- Output level controls giving ±20dB trim
- LP and HP filters
- Easy-to-use vintage interface.
- Windows XP / Vista32 and Mac OS X (Intel & PPC) supported
- VST, AU and RTAS supported
- 24 bit / 192 kHz supported
- Download Mac Version - AU-VST-RTAS-AS
- Download PC Version - VST-RTAS-AS
|
|
|
|
|
|
|
The BT Stereo Imager ST2S provides precise control over the width of the stereo field. This graphically striking device enables you to “visualize” the width of the stereo sound stage. Some stereo tracks may require special treatment in terms of stereo width. The Stereo Imager gives you a simple way to manipulate the spread of the stereo tracks while receiving visual feedback on your changes.
|
|
|
|
|
|
|
The BT Analog Valve Driver ADR2S delivers that authentic saturation effect found in many vintage tube amplifiers. Not only does this model provide a tube-like Overdrive effect, but also High Pass and Low Pass filters and a Noise Gate to enable greater control of your overdriven sound. If your clean tracks call for a powerful and warm overdrive, your answer is the ADR2S.
- 8 Grungelizer-modes
- Each band offers ±12dB of gain
- LP and HP filters with variable Bandwidth-Q
- NoiseGate with Threshold, Attack and Release controls
- Output level control ±20dB
- Easy-to-use vintage interface.
- Windows XP / Vista32 and Mac OS X (Intel & PPC) supported
- VST, AU and RTAS supported
- 24 bit / 192 kHz supported
- Download Mac Version - AU-VST-RTAS-AS
- Download PC Version - VST-RTAS-AS
|
|
|
|
|
|
|
|
The BT Equalizer BQ2S is a simple and elegant 3-band “British-Style” equalizer. The BT Equalizer BQ2S is equipped with high and low frequency shelving curves and a Parametric Mid-Band covering 300Hz-5kHz range. The BT Equalizer BQ2S is ideal for both tracking and mixing applications. The output stage includes a simple peak-limiter or 'Brick-Wall' circuit.
- LF band switchable from 60Hz, 90Hz, 120Hz and 220Hz - low-shelf
- MF band variable from 300Hz to 5kHz - mid-parametric
- HF band switchable from 6kHz, 8kHz, 10kHz and 12kHz - high-shelf
- Each band offers ±15dB of gain and variable Bandwidth-Q
- Output level controls giving ±10dB trim
- Peak-Limiter control
- Easy-to-use vintage interface.
- Windows XP / Vista32 and Mac OS X (Intel & PPC) supported
- VST, AU and RTAS supported
- 24 bit / 192 kHz supported
- Download Mac Version - AU-VST-RTAS-AS
- Download PC Version - VST-RTAS-AS
|
|
|
|
|
|
|
|
The BT Equalizer BX2S is a two band Baxandall tone controls, which is simple but very effective. The BT Equalizer BX2 Baxandall tone-control shelving equalizer provides low shelf (Bass) boost and cut, as well as high shelf (Treble) boost and cut.
- LF band at 100Hz center frequency - low-shelf
- LF band at 5kHz center frequency - high-shelf
- Each band offers ±15dB of gain
- Master level controls giving ±10dB trim
- Peak-Limiter control
- Easy-to-use vintage interface.
- Windows XP / Vista32 and Mac OS X (Intel & PPC) supported
- VST, AU and RTAS supported
- 24 bit / 192 kHz supported
- Download Mac Version - AU-VST-RTAS-AS
- Download PC Version - VST-RTAS-AS
|
|
|
|
|
|
|
|
The BT Equalizer GEQ12 has been created to fit all appplications for the professional engineer. The large number of available EQ bands make the GEQ12 an ideal companion to parametric EQ, it is ideal for recording and mixing, where a professional result is required. The GEQ12 is the perfect tool for sculpting the fine detail out of raw digital audio. 12 EQ bands, adjustable Q and brick-wall Limiter circuit at the output.
|
|
|
|
|
|
|
The BT Equalizer PEQ2B recreates the sound of the classic 60's EQ. The interaction of the passive boosting and attenuating shelving eqs has been designed to bring back the life and musicality lost in the recording. The incredibly musical character of the BT Equalizer PEQ2B is the perfect choice when a truly vintage EQ sound is what your music requires. The PEQ2B is the equalizer of choice for final musical touches.
- Low Frequency control (CPS): from 20Hz to 140 Hz
- Low Frequency Boost control : Shelf Boost, 0dB to +15dB
- Low Frequency Attenuate control: Shelf Atten. 0dB to -18dB
- High Frequency Bandwidth control: Sharp to Broad
- High Frequency control (KCS): from 4kHz to 16kHz
- High Frequency Boost control: Peak Boost, 0dB to +18dB
- High Frequency Shelf Attenuate control: 5kHz, 10kHz and 20kHz
- High Frequency Attenuate control: Shelf Attenuate, 0dB to -18dB
- Ouput level control (Trim).
- Peak-Limiter control
- Easy-to-use vintage interface.
- Windows XP / Vista32 and Mac OS X (Intel & PPC) supported
- VST, AU and RTAS supported
- 24 bit / 192 kHz supported
- Download Mac Version - AU-VST-RTAS-AS
- Download PC Version - VST-RTAS-AS
|
|
|
|
|
|
|
The BT Equalizer PEQ5B delivers the controls and the amazing results of a true analog EQs. Based on the PEQ2B, this model provides passive boosting and attenuating shelving eqs, 3 parametric bands with center frequency, bandwidth-Q and amplitude controls. BT Equalizer PEQ5B is more open and musical than other similar equalizers of the same type by adding an exceptional tone and character to your music.
- 2 bands shelving equalisation
- 3 bands parametric equalization
- 2 bands pass-filters
- LF band variable from 30Hz to 450Hz - low-shelf
- LMF band variable from 200Hz to 2.5kHz - low-mid-parametric
- LM band variable from 400Hz to 5.5kHz - mid-parametric
- HMF band variable from 600Hz to 7.5kHz - high-mid-parametric
- HF band variable from 1kHz to 20kHz - high-shelf
- HPF variable from 20Hz to 80Hz
- LPF variable from 10kHz to 18kHz
- Each band offers ±15dB of gain and variable Bandwidth-Q
- EQ bypass switch on each band
- Input and output level controls giving ±24dB trim
- Peak-Limiter control
- Easy-to-use vintage interface.
- Windows XP / Vista32 and Mac OS X (Intel & PPC) supported
- VST, AU and RTAS supported
- 24 bit / 192 kHz supported
- Download Mac Version - AU-VST-RTAS-AS
- Download PC Version - VST-RTAS-AS
|
|
|
|
|
|
|
Specially designed to meet the most demanding studio tracks, the BT Equalizer PEQ322 features 3 parametric bands with center frequency, bandwidth-Q and amplitude controls, high-pass and low-pass filters as well as low-shelf and high-shelf filters. The BT Equalizer PEQ322 delivers the controls and the amazing results of a true analog EQ. The PEQ322 is the perfect choice when a truly vintage EQ sound is what your music requires.
- 2 bands shelving equalisation
- 3 bands parametric equalization
- 2 bands pass-filters
- LF band variable from 30Hz to 450Hz - low-shelf
- LMF band variable from 200Hz to 2.5kHz - low-mid-parametric
- LM band variable from 400Hz to 5.5kHz - mid-parametric
- HMF band variable from 600Hz to 7.5kHz - high-mid-parametric
- HF band variable from 1kHz to 20kHz - high-shelf
- HPF variable from 20Hz to 80Hz
- LPF variable from 10kHz to 18kHz
- Each band offers ±15dB of gain and variable Bandwidth-Q
- EQ bypass switch on each band
- Input and output level controls giving ±24dB trim
- Peak-Limiter control
- Easy-to-use vintage interface.
- Windows XP / Vista32 and Mac OS X (Intel & PPC) supported
- VST, AU and RTAS supported
- 24 bit / 192 kHz supported
- Download Mac Version - AU-VST-RTAS-AS
- Download PC Version - VST-RTAS-AS
|
|
|
|
|
|
